Synthesis of novel hierarchical ZSM-5 monoliths and their application in trichloroethylene removal

A self-supporting ZSM-5 monolith with a hierarchical porosity was prepared using polyurethane foam (PUF) as a structural template and a hydrothermal synthesis procedure. The synthesized monolith was characterized and investigated towards the adsorption and catalytic oxidation of trichloroethylene (TCE). Adsorption of TCE was studied gravimetrically and oxidation of TCE was studied using a vapor-phase down-flow reactor. Monolithic ZSM-5 displayed good sorption properties and completely oxidized TCE. Conversion levels of 50% and 90% were achieved at reduced temperatures (by ~50 ℃) when compared with the conversion temperatures obtained from the powder counterparts. Besides the activity of the monolith towards TCE adsorption and oxidation, it was stable and enhanced diffusion, thereby reducing pressure drops to a great extent owing to its hierarchical porous nature.     

采用高分辨电镜分析Cu掺杂聚-4-甲基-1-戊烯泡沫材料采用高分辨电镜分析Cu掺杂聚-4-甲基-1-戊烯泡沫材料

利用物理掺杂的方法,制备了铜掺杂聚-4-甲基-1-戊烯(PMP)低密度泡沫材料,采用高分辨扫描电子显微镜和透射电子显微镜,分析了泡沫材料的微观结构、成分及微区成分分布。结果表明:与PMP泡沫相比,铜掺杂PMP泡沫的孔洞直径和网络骨架尺寸变大;铜颗粒镶嵌在PMP泡沫的有机骨架上且有团聚现象;泡沫材料中除碳、铜外,还残留有杂质元素氧;铜颗粒被PMP泡沫包裹,与碳网络骨架之间接触紧密。     

泡沫铝冲击吸能器被动冲击隔离技术研究

对隔振系统中引入泡沫铝冲击吸能器进行探讨.首先,在综合考虑最大加速度和最大相对位移这2个影响舰船设备防护的重要指标情况下,对舰船单层隔振系统中引入泡沫铝冲击吸能器进行了理论分析,在此基础上进行了实验验证.通过实验结果可知,泡沫铝冲击吸能器能有效消除舰船设备的二次冲击.实验结果与理论结果吻合较好,可为泡沫铝冲击吸能器的应...     

Controlled Synthesis of Cr‐Co0.85Se Nanoarrays for Water Splitting at an Ultralow Cell Voltage of 1.43 V

Water splitting has attracted more and more attention as a promising strategy for the production of clean hydrogen fuel. In this work, a new synthesis strategy was proposed, and Co_0.85Se was synthesized on nickel foam as the main matrix. The doping of appropriate Cr amount into the target of Co_0.85Se and the Cr‐Co_0.85Se resulted in an excellent electrochemical performance. The doping of Cr introduces Cr³⁺ ions which substitute Co²⁺ and Co³⁺ ions in Co_0.85Se, so that the lattice parameters of the main matrix were changed. It is worth noting that the Cr0.15‐Co_0.85Se/NF material exhibits an excellent performance in the oxygen evolution reaction (OER) test. When the current density reaches 50 mA cm^?2 for OER, the overpotential is only 240 mV. For the hydrogen evolution reaction (HER) tests, the overpotential is only 117 mV to drive 10 mA cm^?2 of current density. Moreover, when the Cr0.15‐Co_0.85Se/NF material is used as a two‐electrode device for whole water splitting, the required cell voltage is only 1.43 V to reach a current density of 10 mA cm^?2, which is among the lowest values of the published catalysts up to now. In addition, the Cr0.15‐Co_0.85Se/NF catalyst also exhibits excellent stability during a long period of water splitting. The experimental result demonstrates that the change of the lattice structure has an obvious influence on the electrocatalytic activity of the material. When an external electric field is applied, it facilitates the rapid electron transfer rate and enhances the electrocatalytic performance and stability of the material.     

TiO2 thick films supported on reticulated macroporous Al2O3 foams and their photoactivity in phenol mineralization

TiO₂ thick films deposited on macroporous reticulated Al₂O₃ foams with pore size of 10 ppi and 15 ppi were prepared using dip coating from slurries of Aeroxide^® P25 nanopowder and precipitated titania. All prepared films have sufficiently good adhesion to the surface of the substrate also in case of strongly cracked films. No measurable release of deposited TiO₂ after repeated photocatalytic cycles was observed. The photocatalytic activity was characterized as the rate of mineralization of aqueous phenol solution under irradiation of UVA light by TOC technique. The best activity was obtained with Aeroxide^® P25 coated Al₂O₃ foam with the pore size of 10 ppi, annealed at 600 °C. The optimal annealing temperature for preparation of films from precipitated titania could be determined at 700 °C. Films prepared by sol-gel deposition technique were considerably thinner compared to coatings made of suspensions and their photocatalytic activity was significantly smaller.     

An investigation of the accelerated thermal degradation of different epoxy resin composites using X-ray microcomputed tomography and optical coherence tomography

Epoxy resin composites reinforced with hollow glass microspheres, microlight microspheres, 3D parabeam glass, and E-Glass individually were subjected to accelerated thermal degradation conditions. X-ray microcomputed tomography (XμCT) was used to evaluate density changes, reinforcement filler damage, homogeneity, cracks and microcracks in the bulk of the different epoxy resin composites. XμCT 3D images, 2D reconstructed images and voids calculations revealed microspheres damage, filler distributions and showed cracks in all composites with different shapes and volume in response to the thermal degradation conditions. In addition, expansion of air bubbles/voids was observed and recorded in the microsphere and microlight epoxy composite samples. In a complementary way, optical coherence tomography (OCT) was used as a novel optical characterisation technique to study structural changes of the surface and near-surface regions of the composites, uncovering signs of surface shrinkage caused by the thermal treatment. Thus, combining XμCT and OCT proved useful in examining epoxy resin composites' structure, filler-resin interface and surface characteristics.     

泡沫塑料富集–石墨炉原子吸收光谱法测定贝类水产品中痕量铊

采取微波消解的前处理手段消解样品,经泡沫塑料分离富集后,用石墨炉原子吸收光谱法测定贝类水产品中痕量铊。以1.5 mL Fe3+,2 mL H2O2和5%王水介质作为吸附体系将样品中铊分离富集,再以硝酸钯、抗坏血酸作为基体改进剂进行测定。铊的质量浓度在0～50μg/L范围内线性良好,相关系数为0.999 7,方法的检出限可达0.07μg/g。测定结果的相对别准偏差为1.53%～4.01%(n=7),加标回收率为87.1%～98.3%。泡沫塑料富集–石墨炉子吸收光谱法测定贝类水产品中痕量铊是一种准确、安全、便捷的检测方法。     

Preserving the activity of cellulase in a batch foam fractionation process

Foam fractionation isone of the low operating-cost techniques for removing proteins from a dilute solution. The initial bulk solution pH and air superficial velocity play an importantrole in the foam-fractionation process. Denaturation of proteins (enzymes) can occur, however, during the foamfractionation process from the shear forces resulting from bursting air bubbles. At the extreme bulk solution pHs (lower than 3.0 and higher than 10.0), the en zymatic activity of cellulase in the foamate phase drops significantly. Within these two pH boundsan increase in the air superficial velocity, V_o, and a decrease in the bulk solution pH leads to a decrease in the separation ratio (SR), defined as theratio of the protein concentration in the foamate to the protein concentration in the residue. On the other hand, an increase in V_o provides a higher foamate-protein recovery. The process efficiency is defined as the product of foamate-protein recovery times the SR times the cellulase activity. The optimal operating condition of the cellulase foamfractionation process is taken into account at the maximum value of the processefficiency. In this study, that optimal condition is atan air superficial velocity of 32 cm/min and a bulk-solution pH of 10.0. At this condition, the recovered foamate is about 80% of the original protein mass, the SR is about 12, and the en zymatic activity is about 60% of the original cellulase activity.     

CFD Simulation of Rheological Model Effect on Cuttings Transport

Foam, as a non-Newtonian fluid, plays an important role in the underbalanced drilling technique in oil field development. The rheological properties of drilling fluids, such as foam, have a direct effect on flow characteristics and hydraulic performance. Two rheological models—the Herschel–Bulkley model and power law—were fitted to two foam systems in this study. Computational fluid dynamics (CFD) was used to simulate the effect of the rheological models on solid–liquid (cuttings transport) hydraulics in concentric and eccentric annulus during the foam drilling operation. The simulation results are compared to the experimental data from previous studies. The results of CFD using the power law model are in good agreement with experimental results in horizontal annulus with respect to the Herschel–Bulkley model with relative error less than 8%. Thus, for CFD cuttings transport for simulations in inclined and horizontal annulus, it is best to use the power law's rheological model parameters.